Enera PRO 150 L
Enera PRO 150 L pressurized solar thermosiphon water heater with heat-pipe technology and CPC concentrators — ideal for low-insolation regions. Stainless-steel 316 inner tank, Φ58×1800 mm vacuum tubes, 72 h heat retention. Solar only, no electric backup. 2-year warranty.
Price
Warranty
2 years
Conditions: Subject to annual replacement of the magnesium anode.
About this product
About the Enera PRO 150 L solar water heater
The Enera PRO is a high-pressure solar thermosiphon water heater (150 L) built around heat-pipe vacuum tubes and CPC mirror concentrators. The absorbing coating turns solar radiation into heat, and the copper heat pipe transfers it to an exchanger inside the tank — no water ever circulates through the tubes, so the system keeps working even if a tube breaks.
Its parabolic CPC concentrators capture 360° of the vacuum tube, delivering far more output than a conventional flat collector. Two operating modes prevent summer overheating and maximise winter absorption, making the PRO ideal for low-insolation regions: areas with fewer sunny days, low ambient temperatures and hard, highly-mineralised water — perfect for villas in northern Spain.
The inner tank is acid-resistant 316 stainless steel with a copper heat-exchange head and is always hermetic, withstanding 6 bar mains pressure and −40 °C frost. With polyurethane insulation it keeps water hot for up to 72 hours, and the reinforced galvanised-steel frame fits both flat and sloped roofs.
Specifications
Frequently Asked Questions
Does it work in winter and in low-sun regions?
Yes. The heat-pipe vacuum tubes and CPC concentrators are designed for low insolation, withstand frost down to −40 °C, and have a winter mode that maximises absorption — it is well suited to northern Spain.
What happens if a vacuum tube breaks?
No water circulates inside the tubes, so the system keeps working normally even with a broken tube. The tube can be replaced individually at low cost.
How long does it keep water hot without sun?
Up to 72 hours, thanks to the polyurethane-insulated 316 stainless-steel tank.
What maintenance does it need?
Replace the magnesium anode once a year (required to keep the warranty valid) and rinse the vacuum tubes every 6–12 months in hard-water or dusty areas.
Can I connect it to my existing gas or electric water heater?
Yes. The Enera PRO works as a solar pre-heater and integrates with any existing gas or electric hot-water system.
Documents
Other ways to go solar with us
If a ready-made kit isn't quite what you need, pick the path that fits.
Auto-design
Tell us your address and share a recent electricity bill — we size the system, estimate savings, and show a ready proposal.
Best if: you don’t know how many kW you need yet.
Builder
Pick each component yourself: panels, inverter, battery, EV charger. Live price as you go.
Best if: off-grid, hybrid, or a specific brand in mind.