Solar Colector Heat-Pipe (Termosifon Solar)

340.00980.00 inc. VAT

ENERA-SC Solar Collector.

Suited for domestic solar water heating systems and pool heating, as well as for industrial purposes.

This product is composed of the following items:
– manifold (heat exchange unit)
– aluminum frame universal
– set of screws for support
– vacuum pipes “heat-pipe” with a length of 1.8 m, with a maximum capacity of 0.5065388 kWh * per day per year
– plastic fixers (fixing the low part of vacuum tubes)
– antidust seal rings
– conductive thermal paste “MG Chemicals”

Clear
IF IN STOCK, DELIVERY IN: 3-5 DAYS
SKU: N/A Categories: , Tags: , , ,

Installation Manuals and More Information

ENERA DOWNLOAD ZONE

 

solar colector

solar colector for hot water

The solar collector ENERA CS heat-pipe is designed to build a heating system for sanitary water, heating pool water, water or other technical fluids for various needs solely due to sunlight.

SHC Fast Assembly CPC Heat Pipe Collector

– Sunlight concentrators make the efficiency doubly increased.
– Fast assembly CPC concentrators more easily installation and transportation.
– 360 degree sunlight absorber, hot water in cloudy.
– Overheating protection just disassembly the CPC concentrators in summer.
– Temperature startup more faster than the normal solar thermal collectors.
– Applicable for the industry heating.
– More thermal production based on the same aperture area.
– EN12975/Solar Keymark.

CPC Reflector

Maximum performance at minimum dimensions. Absorber is bigger than gross surface area. Three dimensionally 360 degree shaped absorbers for the greatest possible energy collecting surface, utilized up to most of the diffuse and direct radiation from morning to evening.

– The power output higher 50% compare to the normal solar collectors. Smaller installation area but equal to the same power output.
– Patented fast assembly CPC, flaky sheet, more convenient for the installation and transportation.

Additional information

Weight N/A
Number of Tubes

8, 12 (1440 W), 18 (2191 W), 24 (2943 W)

Inlet and outlet hole

Male 3/4 inch

Solar collector tube

3.3 Borosilicate glass with N/Al coating+copper tube + aluminium fin

Vacuum tube size

58 mm x 1800 mm

Thickness of glass tube

1.6 mm

Vacuum tube tightness

Р < 0,005 Pa

"Heat pipe" material

Copper

Absorption

as=0.93-0.96(AM1.5)

Emission ratio

eh=0.04-0.06(80ºC±5ºC)

Idle sunning property parameters

Y = 220-260m2. C / кВт

Average heat loss coefficient

ULT = 0.6-0.7W / (m2.ºC)

Max pressure

0,8 MPa

Support

Stronger galvanized steel

Collector solar

ENERA (Spain, China)

Heat preservation

72 hours

Certification

CE/ISO9001/CCC/SOLAR KEYMARK, EN12975